12
Parts identi
fi
cation (Fig. 1)
Outer foil
Trimmer
Outer foil frame
Pop-up trimmer switch
Inner blades
Outer foil frame release buttons
Power switch
Appliance socket
Travel cap & holder (cap)
Bikini attachment
AC adaptor (RE6-71)
Power plug
Charging plug
Charging indicator lamp
Accessories
Cleaning brush
Pouch
Attaching or removing the travel cap & holder
Press down on both sides of the cap to attach or remove.
(Fig. 2)
• Check that all four protrusions on the shaver are inserted securely.
• The shaver can be kept vertically or horizontally. When carrying
the shaver, you can use the cap to protect the outer foil and
prevent erroneous operation of the switch.
Charging (Fig. 3)
• Make sure that the shaver is turned off.
• Wipe off any water droplets on the appliance socket.
• You cannot operate the shaver while charging.
1
Place the shaver on the AC adaptor until it clicks.
2
Insert the power plug into a household outlet.
• It will take approximately 20 hours to fully charge the shaver.
• Check that the charging indicator lamp glows.
3
After charging is completed, unplug the power plug
and then the shaver.
(for safety and energy saving)
• The charging indicator lamp continues to glow after charging
is completed. There is no indication to show that “charging is
completed”.
• Charging the battery for more than 20 hours will not affect
battery performance.
• Always unplug the shaver from the AC adaptor except when
charging.
Notes
• If there is noise from the radio or other sources while using or
charging the shaver, move to a different location to use it.
Summary of Contents for ES-WL80
