Panasonic ES-WL60, Operating Instructions Manual

Page: 14 / 32

14
Cleaning
• Regular cleaning will keep your shaver in a hygienic state and
maintain the cutting performance.
• Make sure that the shaver is turned off.
• Do not wipe with alcohol or nail polish remover. Doing so may
cause malfunction, cracking of the parts or discoloration.
Wet cleaning (Fig. 9)
1. Apply some hand soap onto the outer foil.
2. Turn the shaver on and turn off after few seconds.
3. Press the outer foil frame release buttons to remove the outer
foil frame.
4. Rinse the inner blade and outer foil frame with cold or lukewarm
water.
• Do not use hot water.
5. Wipe the shaver with a dry cloth and dry them well.
Dry cleaning (Fig. 10)
Clean the hair dust with the cleaning brush.
Storing
Attach the cap.
• Do not leave the shaver in a place with high temperature and
high humidity. Doing so may cause malfunction.
Replacing shaving head components
Replacing the outer foil
1. Press the outer foil frame release buttons to remove the outer
foil frame. (Fig. 11)
2. Hold the knobs on the outer foil with your fi nger. Lift it up in the
direction of the arrow while pushing the edge of outer foil from
the outside.
(Fig. 12)
3. Align the directions of knobs as illustrated and insert the new
outer foil into the frame. (Fig. 12)
4. Insert the plastic edges into the frame until they click.