14
English
▼
▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the shaver,
and the trimmer completely.
•
Allow the shaver to dry in the shade,
avoid direct sunlight and then apply oil.
9. Lubricate the shaver.
It will keep the movement of the blade
smooth and maintain a comfort shave.
1. Apply one drop of oil to each of the
system outer foils.
2. Raise the trimmer and apply a
drop of oil.
3. Switch the shaver on, and run it for
approximately fi ve seconds.
4. Switch off the shaver, and wipe off
any excess oil from the system
outer foil with a soft cloth.
►
Notes
•
Do not use any kitchen or bathroom detergents other than hand
soap.
Doing so may cause malfunction.
•
Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration of
the parts.
Wipe with diluted soapy water.
•
Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
►
Cleaning with the long brush
Clean the outer foil section,
system outer foil, the shaver body
and the trimmer using the long
brush.
►
Cleaning with the short brush
•
Clean the inner blades using the short
brush by moving it in direction as illustrated.
•
Do not move the short brush
perpendicularly against the blades as it
will damage the inner blades and affect
their sharpness.
Replacing the system outer foil and the inner blades
system outer foil
once every year
inner blades
once every two years
►
Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►
Attaching the outer foil section
After turning the water inlet surface to the front,
securely attach the outer foil section to the shaver
until it clicks.
ES-ST2N_US.indb 14
2016/06/09 14:23:04
