17
English
Problem
Action
Shaver does not operate
even after charging.
Use the appliance in an ambient
temperature approximately 5 °C
(41 °F) or higher.
The battery has reached the end
of its life.
The shaver will not operate with
the AC adaptor connected. Please
use the shaver after it has been
sufficiently charged and the AC
adaptor disconnected.
The driving sound
changes while shaving.
The shaving sensor is operating.
The sound changes depending on
the beard thickness.
Makes a loud sound.
Apply oil.
The blades will not move
smoothly when there is no oil on
the blades, requiring more power.
The shaver makes a high‑pitched
sound due to the linear motor drive.
This does not indicate a problem.
Confirm that the blades are
properly attached.
Clean the system outer foil with
the brush.
The odor is getting
stronger.
This can be improved by cleaning
every time after shaving.
Problem
Action
The shaver cannot be
properly cleaned even
after water is poured from
the water inlet.
When the shaver is very dirty, first
use the cleaning brush to remove
beard trimmings.
Or, remove the foil frame and
wash with water.
(See page 13.)
Shavings fly out in all
directions.
This can be improved by cleaning
every time after shaving.
Clean the inner blades with the
brush when shavings are
adhering to the inner blades.
Confirm that the cleaning shutter
is firmly closed.
System outer foil gets hot.
Apply oil.
Replace the system outer foil if it
is damaged or deformed.
(See page 15.)
You do not get as close a
shave as before.
Apply oil.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
ES-ST2N_US.indb 17
2016/06/09 14:23:04
