Panasonic ES?ST25, Operating Instructions Manual

Page: 12 / 278

12
While charging
After charging is
completed
Abnormal
charging
The charge
status lamp ( )
glows red.
The charge
status lamp ( )
turns off.
The charge
status lamp ( )
will blink twice
every second.
•
After charging is completed, turning the power switch ON
with the shaver plugged in will cause charge status lamp to
light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
•
Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
The charge status lamp ( ) will blink twice every second
when there is a problem with charging.
Charge the shaver within the recommended ambient
temperature range.
•
When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp
( ) may not glow. It will eventually glow if kept connected.
4
4
Disconnect the adaptor [
B 
] after charging is
completed.
•
Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
Using the shaver
1
1
Press the power switch [
A 7
] to select the
desired shaving mode.
•
Each time you press the power switch, the shaving
mode changes from “Shaving sensor mode” “Normal
mode” “OFF.”
Shaving sensor
mode
Normal mode OFF
Beard thickness is
automatically
sensed and the
power is
automatically
adjusted when
shaving.
The power level is
constantly
maintained while
shaving.
—
The shaving
sensor lamp ( )
glows blue.
The shaving
sensor lamp ( )
turns off.
The shaving
sensor lamp ( )
turns off.