29
English
Warning
Do not wash or apply water to the AC adaptor or
self-cleaning recharger. Failure to observe this
may cause electric shock or result in short
circuits.
When the water does not drain from the
cleaning tray
Beard trimmings may clog the drain at
the bottom of the cleaning tray.
In this case, you cannot clean or dry
the shaver.
Push the beard trimmings down
through the drain with a toothpick etc.
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning
tray of the self-cleaning recharger. Follow the steps
below to remove them. We recommend doing this each
time you change the detergent cartridge.
1. Be sure to remove the water tank
and the appliance plug from the self-
cleaning recharger.
Be careful not to spill the cleaning
liquid.
•
2. Gently wipe off any beard trimmings
attached to the inside of the cleaning
tray with a cloth or tissue paper
dampened with water.
Clean the corners and uneven
parts of the cleaning tray with a
cotton swab dampened with water.
•
Do not pull hard on the rubber blade protector (
) at
the bottom of the cleaning tray. The rubber may come
off if you pull hard on it. It is only necessary to pull it
up slightly.
'5.(A%*KPFD
Summary of Contents for ES-LF70
Page 31: ...31 MEMO 5 A KPFD ...
