Thin Type Ionizer
ER-VW
3
Minimum air consumption 15 ℓ/min. (ANR)
ER-VW
can utilize air
flow levels starting
from a minimum of
15 ℓ/min. Because
the amount of air
consumed is so low,
the loads placed on
air supply equipment
can be reduced and
costly clean air can
be used much more
economically.
BASIC PERFORMANCE
No damage to electronic devices from inverse charging
A high-frequency 68,000
Hz AC corona discharge
is used, so that (+) ions
and (–) ions are emitted in
rapid alternation. Because
there are none of the
sudden ion discharges
that occur with other types,
there is no tendency to
partial oppositely-charging
even when charge removal
insulators with different
localized charges, so that
any damage to electronic
devices can be avoided.
Produces excellent ion balance
The adoption of high-frequency AC method allows
extremely stable ion balance to be achieved. The ion
balance is not affected by the pressure of air supplied
and the setup distance, so no troublesome adjustments
are required after setup.
Compact and thin design
The thickness of the unit is 18.9 mm
0.744 in
. Even so,
the nozzle angles can be adjusted, so that they can still
be installed in places where there are space restrictions,
such as inside other equipment or along several adjacent
production
lines.
MOUNTING / SIZE
Comparison of air consumption
Notes: 1) Minimum width
dimensions after nozzle
angle adjustment
2) Maximum width dimensions after nozzle angle adjustment
ER-VW
Previous
spot type
Minimum 100 ℓ/min. (ANR)
to
Maximum 300 ℓ/min. (ANR)
Air consumption
ℓ/min. (ANR)
300
200
100
0
Minimum 15 ℓ/min. (ANR)
Maximum 60 ℓ/min. (ANR)
to
In contrast to previous
low-frequency types and DC
types, the high-frequency AC type
generates (+) ions and (–) ions
more efficiently and thus it creates
a stable environment with high ion
density. This means that a stable
ion balance and excellent charge
removal performance can be
provided regardless of the setting
distance.
2 kV
approx.
0 V
–2 kV
approx.
Time
Time
High-frequency
68,000 Hz
Low-frequency
50 to 60 Hz
High-frequency
AC method
Other AC methods
High-frequency 68,000 Hz AC method provides
the highest level of charge removal performance
5 kV
approx.
0 V
–5 kV
approx.
High-frequency
AC method
Other
AC methods
When object is
(–) charged
The charge on object is
removed with good balance
The charge on object becomes 0 V overall
but some parts are oppositely-charged
APPLICATIONS
Removing charges from IC trays
Removing charges during pickup
from dicing tape
Removing charges from adjacent lead frame
conveyor lines
Removing charges surfaces of CDs / DVDs
Removing charges from LCD module clamps
Removing charges during cell production
127 mm
5.000 in
49 mm
1.929 in
(Note 1)
18.9 mm
0.744 in
64.3 mm
2.531 in
(Note 2)
