8
Setting the trimming height
For a trimming height of 0.8 mm to
2.0 mm, turn the dial to the desired
height.
Use an attachment for a trimming
height higher than 3 mm or more.
Trimming
height
indicator
0.8
1.1
1.4
1.7
2.0
Using the comb attachments
1
1
Select the trimming heights indicated on the
outside of the attachments.
2
2
Set the dial to “0.8” and then
mount the attachment to the
clipper until it clicks as
illustrated.
click
Removing the attachment from the clipper
Push the lever at the back of the
attachment, and open it in the direction of
the arrow to remove it.
• Do not forcefully push down while
holding the tip of the comb. The blade is
removed with the attachment.
Care
Removing and mounting the blade
• Be sure to turn off the power before you remove the blade.
Removing the blade
Hold the clipper with the switch
facing upward and push the blade
with your thumb while catching
the blade in your other hand.
ER-GP81_AUS.indb 8
2017/10/11 13:59:22
