Panasonic ER-GB62, Operating Instructions Manual

Page: 15 / 20

15
Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the
store where you purchased the unit or a service
centre authorized by Panasonic for repair.
Problem Action
The trimmer
has become
blunt.
Charge the trimmer.
(See page 7.)
Clean the blade and apply oil.
(See pages 13 and 14.)
Replace the blade.
(See page 14.)
Trimmer
stopped
functioning.
Charge the trimmer.
Or use with the AC operation.
(See pages 7 and 8.)
Charge the battery for
approximately 8 hours continuously
to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.) Contact an
authorized service centre for repair.
► Replacement parts
Replacement part is available at your dealer or Service
Centre.
Replacement parts for
ER-GB62
Blade WER9605
Do not use any blade other than the one dedicated as it
may cause defect in performance.
Remounting the blade
Fit the mounting hook into the
blade mounting on the trimmer and
then push in until you hear a click.