13
Trimming body hair
Trim armpits and bikini lines with the comb attachment
for body hair.
• The trimming height is approximately 1.5 mm.
• Do not use when body hair is wet.
Wet body hair may stick to the skin or bunch up,
making it difficult to trim.
1
Attach the comb attachment for body hair to
the main body. (See page 9.)
2
Holding the trimmer with the
power switch at the bottom,
trim by bringing the blade in
contact with the skin and
slowly moving the trimmer
in the direction as
illustrated.
• The desired results may not be achieved if hair is too
long. In this case, trim the hair to a length of about
10 mm before using the trimmer.
Cleaning the trimmer
• It is recommended to clean after every use.
1. Remove the trimmer from the AC adaptor.
▼
▼
To remove light dirt
To remove heavy dirt
2. Remove the comb
attachment and turn
the trimmer on.
3. Run water down the
water inlet at the front
of the main body, rinse
thoroughly for
approximately 20
seconds, and then turn
the trimmer off.
• Rinse with water and
shake up and down
several times to
remove the water.
2. Remove the comb
attachment and blade.
3. Clean the trimmer, the
blade and the comb
attachments with
running water.
• Rinse with water and
shake up and down
several times to
remove the water.
▼
▼
Summary of Contents for ER-GB62
Page 19: ...19 MEMO ...
