9
Engli
sh
Trimming body hair (Fig. 4‑
7
)
Trim armpits and bikini lines with the comb attachment for
body hair.
1
Attach the comb attachment for body hair to the head.
2
Holding the trimmer with the power switch at the bottom,
trim by bringing the blade in contact with the skin and
slowly moving the trimmer in the direction as illustrated.
• The desired results may not be achieved if hair is too long. In
this case, trim the hair to a length of about 10 mm before
using the trimmer.
Maintenance
• Make sure that the main body is turned off.
• Lubricate after cleaning and store the head with one of the
comb attachments attached.
How to clean
►
With water
To remove light dirt
To remove heavy dirt
1. Remove the comb
attachment, run water down
the water inlet. (Fig. 5)
1. Remove the head, comb
attachment and blade and
rinse them with running water.
▼
▼
2. Shake up and down several times to remove the water.
• Be careful not to hit the appliance on the sink or any other
object while draining the water.
3. Wipe off the water with a dry cloth and dry it well.
• It will dry faster with the blade removed.
►
With the cleaning brush (Fig. 6)
1. Remove the head, comb attachment and blade.
2. Brush off any hair trimmings from the head, comb
attachment and from around the blade.
3. Brush any hair trimmings out from between the stationary
blade and the moving blade while pressing down the
cleaning lever (
b
) to raise the moving blade.
Notes
• Do not wipe with thinners, benzine, alcohol etc. Doing so may
cause malfunction, or cracking or discoloration of the parts.
