EN27
Select again in steps
2
–
4
.
●
Press
within approximately 40 seconds of reselecting an action in step
2
, otherwise the reselection will be canceled
automatically.
Press the MEMORY button for 2 seconds during the action.
●
You can save your favorite manual action, stretch action and air action to create your own course. (Pages EN33 – EN35)
4
Press
to start the action.
●
The massage heads will move to selected position automatically to
start the massage after the body scanning is completed. (See page
EN24 about body scanning)
●
See pages EN36 – EN39 for setting the massage in accordance with
your preferences.
●
When massaging the hip, air massage will not be carried out at the
same time.
●
When a massage to the same location has continued for 5 minutes,
massage heads will automatically move up approximately 3 cm (1.2 in.).
(Depending on the location, the massage may move up.)
Press
to add tapping.
The tapping can be turned OFF/ON by pressing this button.
OFF/ON cannot be selected when massaging with the tapping
action.
5
The massage will automatically end
approx. after 16 minutes.
To change an action in the middle of a massage
To save manual action in the memory course
If you want to massage with tapping action only
❶
Press
to turn on the power.
❷
Press
.
❸
Start the tapping action by pressing .
ㅡ
Tapping action will be performed at the current massage head positions without performing body scanning.
ㅡ
To change the action, select with steps
2
–
4
.
When you want a concentrated massage of a particular
body part with your favorite action
