Setting up the massage lounger
EN13
This is initially inserted
in the lock switch of the
power switch section
prior to leaving the
factory.
●
Lock switch key
(1 pc.)
4 mm
●
Allen key
(1 pc.)
●
Attachment screws
(M6 × 13) Black
(4 pcs.)
(M6 × 29) Silver
(2 pcs.)
●
Controller stand
Controller holder
Controller holder
fixing screw
Cord clip
(Cross section)
4 mm
Appliance inlet
Connector
Power cord
Power switch section
①
Check for dirt and damage on appliance inlet of the
power switch section and the connector of the power
cord.
②
Insert the connector into the appliance inlet.
③
Be sure to push the connector in all the way.
4)
Connect the power cord to the unit
GROUNDING INSTRUCTIONS
●
This unit must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
●
This unit is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
5) Turn on the power and raise the
backrest to the upright position.
①
Insert the power plug into the power
outlet.
ㅡ
Always be sure to insert into an AC 120 V
plug.
②
Confirm the lock switch key is set to
the “open” position.
③
Confirm the power switch is set to
the “on” position.
④
Press
on the controller twice.
ㅡ
Press once, and then press again
approx. 1 second later. Backrest will rise
automatically.
lock switch
on
off
lock
open
power
①
●
②
●
③
