manualshive.com logo in svg

Panasonic EP-MA73, Service Manual

Share
Download
Panasonic EP-MA73 Service Manual Download Page 47

47

Caution

• Be careful of three hooks each on right/left sides of inner

side of the Side cover inside when installing.

• When removing the Shoulder side plate, remove four screws

each on right/left sides on the back side of the Rear frame
and remove the Shoulder side plate.

9.8.

Removing the Seat side unit

1. Remove the Armrest.
2. Remove the Side cover.
3. Remove the Elbow base.
4. Remove seven screws fixing the Inside cover and the

Inside cover fitting.

Caution

• When you installing the Seat side unit, the work would be

easier if you tighten seven screws halway first and
tighten them fully.

5. Cut Cable ties and remove two Hoses each of right/left

sides.

Caution 

• When assembling, pass the Hose through the hole of A.

9.8.1.

Removing the Seat side unit left

1. Proceed the procedures of Removing the Seat side unit.
2. In the position of B, remove the green Hose and remove

the Seat side unit.

9.8.2.

Removing the Seat side unit right

1. Proceed the procedures of Removing the Seat side unit.
2. In the position of C, cut the Cable tie and remove the

brown Hose and remove the Seat side unit.

Summary of Contents for EP-MA73

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands