manualshive.com logo in svg

Panasonic EP-MA73, Service Manual

Share
Download
Panasonic EP-MA73 Service Manual Download Page 44

44

9 Disassembly and Assembly Instructions

Caution in Disassembly/Assembly

• Be careful not to cut the cloth, Hoses, or Lead wires when cutting cable ties.
• Bind the cable ties on the white tapes on the Lead wires.

9.1.

Removing the Armrests

1. Remove Air hoses (two each on right/left sides).
2. Remove a screw each on right/left sides of the back of the

Armrests.

3. Slide the Armrest backward ( 

 ) and lift it upward ( 

 ) to

remove it.

9.2.

Removing the Side covers

1. Remove the Armrests.
2. Remove three screws each on right/left sides and five

hooks each on right/left sides.

Caution

• The work would be easy if you insert the hook in the front of

the Side cover (two each on right/left) first.

9.3.

Removing the Elbow bases

1. Remove the Armrest.
2. Remove the Side cover.
3. Remove two bolts each on right/left sides of the Elbow

bases and two Belts on right/left sides, and remove the
Elbow base.

Caution

• When installing the Elbow base, be sure to install the

shorter bolt on the front and the longer bolt on the back.

Summary of Contents for EP-MA73

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands