4 Disassembly and Assembly instructions
4.1 Disassembly instruction
(1) Remove Hinge Cover from Main Body
(4) Remove 3 screws for fitting Press Plate side
by Slotted screw driver (Minus Driver.)
by Phillips screw drivers (Plus Driver).
(2) Remove Hinge Pin by hand pressing at
(5) Remove Press Plate Cover from Press Plate
Housing side and Press Plate side.
in Grip follow as below drawing.
(3) Remove Pivot spring by gripping
(6) Take off Iron Plate from Press Plate.
and pulling it out from the Main body
Hinge Cover
Minus Driver
Housing
Press Plate
Hinge Pin
Pivot Spring
Screws
Press Plate Cover
Press Plate
