3. TROUBLESHOOTING GUIDE
Refer to WIRING CONNECTION DIAGRAM.
No operation
(LED does not light)
< CHECKING PROCEDURE >
< CHECKING METHOD >
< REMEDY >
Check Power cord.
Check the conductivity
of power cord.
Check Circuit assembly b/k
LED light, but Iron
Plate(Heater)
does not become hot
Check Iron plate of Heater
A : Housing side
Replace Heater A ass'y b/k
Check resistance value between lead
wires of the Housing side assy is
approx. 20.0±1.0
Ω
Check the Lead Wire
Check connecting of Lead Wire
Replace Heater A ass'y b/k
or Heater B ass'y b/k
Replace Heater B ass'y b/k
OK
Check Power Switch
Check continuous at Switch ON
position
Replace the Power Cord
Check Iron plate of Heater
B : Press plate side
Check resistance value between lead
wires of the Press plate side assy is
approx. 20.0±1.0
Ω
Check Circuit assembly b/k
Replace Circuit assembly b/k
Replace Power switch
Replace Ciruit assembly b/k
OK
NG
NG
NG
NG
NG
NG
OK
NG
OK
