6
A
5
●
●
●
●
●
●
●
●
■
T
■
T
Connections
●
External equipment and cables shown are not supplied with this TV.
●
Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
●
Check the type of terminals and cable plugs are correct when connecting.
●
When using an HDMI cable, use the fully wired one.
●
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●
Also read the manual of the equipment being connected.
Terminals
3
1
6
4
2
5
1
USB 1 - 2 port
2
HDMI1 - 3
3
Aerial terminal
(see below)
4
AV1 (COMPONENT / VIDEO)
(p. 8)
5
DIGITAL AUDIO OUT
6
ETHERNET (p. 8)
Basic connections
Mains lead and aerial
Special notices for receiving digital terrestrial services
●
If you receive analogue and digital TV signals through two separate aerials, use an RF mixer to mix them.
Analogue and Digital
TV signal
RF mixer
Aerial
Digital TV
Analogue TV
Aerial
●
If you receive analogue TV signals through a cable TV network, an aerial is required to receive digital TV signals.
In this case, using an RF mixer is not recommended because the TV signals interfere with each other.
●
An RF selector is available to switch analogue and digital TV signal.
Cable
Analogue or Digital
TV signal
RF selector
Analogue TV
Digital TV
Aerial
