299
DX-600/800
APR 2002
Edition 1.0
To Retrieve the Internet Parameters for Backup
(3)
@select-domain to @end
:
Defines up to 10 alternate Domain Names programmed in your machine for the
Selectable Domains in section (3) between @select-domain to @end block.
(4)
@relay-domain to @end
:
Defines up to 10 Domain Names programmed in your machine that have been
authorized to access your Internet Fax for Relayed XMT Request in section (4)
between @relay-domain to @end block.
(5)
@system to @end
:
Defines the following Internet Parameters programmed in your machine in section
(5) between @system to @end block.
(a) Default Domain
(b) Manager s Email Address
(c) Relay XMT Password
(d) Remote Password
(6)
@ldap to@end
:
Defines the following Internet Parameters programmed in your machine in section
(6) between @ldap to @end block.
(a) LDAP Server Name
(b) LDAP Login Name
(c) LDAP Password
(d) LDAP Search Base
(7)
@mib to @end
:
Defines the following Internet Parameters programmed in your machine in section
(7) between @mib to @end block.
(a) Community Name(1)
(b) Community Name(2)
(c) Device Name
(d) Device Location
(8)
:
This header must be deleted before the email is sent to your machine for
reprogramming of Internet Parameters.
The information following the "#" sign is ignored by your machine, therefore, you
can leave it as is, or delete it if you wish.
After receiving your machine s email with the Internet Parameters, store the email file as text (.txt) on your
PC for backup purposes.
To change or update the Internet Parameters, follow the steps below:
1. Create a New Email Message, fill out the "To" and "From" Address line and the Subject line information
for section (1) below:
2. Open the backup, Internet Parameter text file. Copy the body text and paste it on the body of the newly
created email message.
3. Delete any headers that may be present in the body of the email, as unsupported data will be rejected.
The information following the "#" sign is ignored by your machine.
4. Edit a parameter and/or add additional Sender Name(s) or Domain Name(s).
5. When finished, use the "File/Save as..." command and save the updated file with ".txt" extension as a
backup.
6. Send the email message to your machine to update the Internet Parameters.
To Edit the Retrieved or Backup Internet Parameters File
To
:
Your machine’s email address.
From
:
This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Internet
Parameters and for error message notification.
Subject
:
To Store data, type: #set parameters(password)#
Summary of Contents for DX-600
Page 357: ...memo ...
Page 358: ...DZZSM00184 0 ...
