Panasonic DX-600, Service Manual

Page: 145 / 358

145
DX-600/800
APR 2002
Edition 1.0
711 RCV LAN Incorrect LDAP settings. LDAP Server Name, LDAP Login
Name, LDAP Password and/or LDAP
Search Base are incorrect.
712 XMT LAN Unknown email address replied
from the Mail Server. Mail Server received an incorrect email
address. (Dependent on Server’s Mail
application)
714 XMT
RCV LAN LAN Interface error.
Cannot logon to the LAN. The 10Base-T/100Base-TX cable is not
connected.
An unexpected LAN problem occurred.
Check the LANC/LANB PCB connector.
715 XMT LAN TCP/IP connection timed out. Incorrect IP Address is set.
Verify the IP Address, Default Router IP
Address, SMTP Server IP Address.
716 XMT LAN Cannot logon to the LAN. Incorrect SMTP Server IP Address is
set.
No email application is activated on the
Mail Server.
717 XMT LAN Incomplete SMTP Protocol
transmission. Mail Server’s hard disk may be full.
Mail Server is defective.
718 XMT LAN Page Memory Overflow occurred
while receiving printing data. The
paper size selected within your
application to print is larger than
the paper size loaded in the
cassette(s). Check the document size and
resolution.
Ask originator to re-send in a supported
size and resolution.
719 RCV LAN Received data via LAN is in a
format that is not supported. Ask the originator to re-send with a
supported file attachment:
* In a TIFF-F format.
* Image data conforming to A4/Letter
size.
720 POP LAN Unable to connect with the POP
Server. Incorrect POP Server address is set.
POP Server is down.
721 POP LAN Unable to login to the POP Server. Incorrect User Name or Password is
set.
722 RCV LAN Failed to obtain the Network
Parameters (such as: IP Address,
Subnet Mask, Default Gateway IP
Address, etc.) from the DHCP
server. LAN Cable is disconnected.
DHCP is not available.
(Contact the Network Administrator.)
725 XMT
POP LAN DNS Server connection timed out. Incorrect DNS Server address is set.
DNS Server is down.
726 XMT
POP LAN Received an error response from
the DNS Server. Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
729 XMT LAN Failed to authenticate (SMTP
AUTHENTICATION) when
connecting with the SMTP server. SMTP AUTHENTICATION, User Name
and/or Password are incorrect.
(Contact the Network Administrator.)
730 RCV LAN Unable to program the Internet
parameters or the autodialer with
Email from a PC. Verify that the Fax Parameter #158 is
set to 2: Valid.
Fax Information Codes
Code Mode Phase Description of Problem Cause