Panasonic DP-C213I Operating Instructions Manual Download Page 82

Page: 82 / 98

Chapter 2 More Menus F

eatures

Select the registered form, and then
select “

”.

For the details about how to register the
form, refer to the

Save

(see page 83).

When Hard Disk Drive is not installed, the
screen of step 5 is not displayed.
(Hard Disk Drive has been equipped
normally with DP-C354/C264. It is optional
equipment for DP-C323/C263/C213.)

Set the order of overlay form, and the
scanned original, and then select
“

”.

Enter the desired number of copies.

Press the

Start

key.

When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.

After finishing copying, press the

Reset

key

to return to the initial screen of the current
active mode.

Overlay
on Top

Copied with the scanned original
overlaid on the form.

Overlay
on Bottom

Copied with the form overlaid on
the scanned original.

Summary of Contents for DP-C213I



































































































Search results

Summary of Contents for DP-C213I

Reviews:

Related manuals for DP-C213I

Brands by name

Popular brands

Panasonic DP-C213I, Operating Instructions Manual

Search results

Summary of Contents for DP-C213I

Reviews:

Related manuals for DP-C213I

Brands by name

Popular brands