Panasonic DP-6530 Operating Instructions Manual Download Page 86

Page: 86 / 172

4-30

USING THE EDITING FUNCTIONS

13. OVERLAY (Cont.)

Overlaying Originals with Stored Image

Press the OVERLAY key.

Press the file name you desire (the selected file

name will be shaded), and press the SET key.

Press the EDIT key to enter the edit menu, and

press the OVERLAY key.

- If the desired function keys are not displayed, press the

Next key to change the menu screen.

Place paper in the drawer(s).

Page 2-4

Place the original(s).

Page 2-9

Select other copy modes as required.

Press the START key.

Confirming Overlay (Test Print)

When overlaying more than one original with the stored image, the first original is overlaid with the stored
image and printed out.

Perform the above step 1 to step 4.

Press the file name you desire (the selected file

name will be shaded), and press the TEST PRINT

key.

Summary of Contents for DP-6530













































































































































































Search results

Summary of Contents for DP-6530

Reviews:

Related manuals for DP-6530

Brands by name

Popular brands

Panasonic DP-6530, Operating Instructions Manual

Search results

Summary of Contents for DP-6530

Reviews:

Related manuals for DP-6530

Brands by name

Popular brands