Panasonic DP-6530 Operating Instructions Manual Download Page 84

Page: 84 / 172

4-28

USING THE EDITING FUNCTIONS

13. OVERLAY

This function stores the images that you frequently use and makes copies by overlaying onto the copied
originals.
- 24 different images can be stored.
* The stored image cannot be printed with reduction and enlargement. However, the original can be

overlaid with reduction and enlargement by adjusting it to the size of stored image.

Press the row of the file name list you desire, then

press the FILE NAME key.

Press the MEMORIZE key.

Place the original you want to have memorized.

Page 2-9

Press the EDIT key to enter the edit menu, and

press the OVERLAY key.

- If the desired function keys are not displayed, press the

Next key to change the menu screen.

Storing Image

Overlay

Storing Image

Summary of Contents for DP-6530













































































































































































Search results

Summary of Contents for DP-6530

Reviews:

Related manuals for DP-6530

Brands by name

Popular brands

Panasonic DP-6530, Operating Instructions Manual

Search results

Summary of Contents for DP-6530

Reviews:

Related manuals for DP-6530

Brands by name

Popular brands