Panasonic DP-150FP Operating Instructions Manual Download

Page: 93 / 114

INTE

NCE

Maintenance

Troubleshooting

Information Codes

When something unusual occurs, the display may show one of the Information Codes listed below. These will
help you to identify and correct the problem.

Info.

Code

Meaning

Action

Page

400

During initial handshake, receiving station did not
respond or communication error occurred.

1. Check with the other party.
2. Reload the document and send again.

401

Remote station required a Receiving Password to
receive the document.

Check the remote station.

402

During initial handshake, communication error
occurred.

Reload the document and send again.

403

No polling capability at the remote side.

Ask remote side to set "POLLED=ON".

404/405 During initial handshake, communication error

occurred.

Reload the document and send again.

406

Receiving Password does not match.

Check the password.

407

No confirmation from the receiving station for the
previous page sent.

Wait a few minutes and send again.

408/409 Remote side confirmation of previous page is illegible. Wait a few minutes and send again.

410

Communication aborted by the transmitting side.

Check with the other party.

411

Polling password does not match.

Check the polling password.

412

No data from the transmitting side.

Check with the other party.

414

Polling password does not match.

Check the polling password.

415

Polling transmission error.

Check the polling password.

416/417
418/419

Received data has too many errors.

Check with the other party.

420/421 Machine goes to receiving mode, but receives no

command from the transmitting side.

1. Remote side misdial.
2. Check with the other party.

422/427 Interface is incompatible.

Check with the other party.

430/434 Communication error occurred while receiving.

Check with the other party.

436/490 Received data has too many errors.

Check with the other party.

492/493

494

Communication error occurred while receiving.

Check with the other party.

495

Telephone line disconnected.

Check with the other party.

Summary of Contents for DP-150FP



















































































































Search results

Summary of Contents for DP-150FP

Reviews:

Related manuals for DP-150FP

Brands by name

Popular brands

Panasonic DP-150FP, Operating Instructions Manual

Search results

Summary of Contents for DP-150FP

Reviews:

Related manuals for DP-150FP

Brands by name

Popular brands