manualshive.com logo in svg

Panasonic DP-100 series, Instruction Manual, Page: 3 / 9

Share
Download
Panasonic DP-100 series Instruction Manual Download Page 3

3

Hysteresis mode

The comparative output is turned ON or OFF (depending on the N.O./N.C.
setting) when the upper or lower threshold is reached and remains ON or
OFF until the other threshold is reached.

Window comparator mode

The comparative output is turned ON or OFF (depending on the N.O./N.C.
setting) when the pressure lies between the upper or lower threshold. The
tolerance of the threshold is specified by the hysteresis setting. For details,
see page 6, section 11, PRO MODE.

DP-100 has 3 different modes:

RUN mode. For details, see page 3, section 9, RUN MODE.

Menu setting mode. For details, see page 5, section 10, MENU
SETTING MODE.

Pro mode. For details, see page 6, section 11, PRO MODE.

Switching modes

Press 

 to switch between modes. 

From RUN mode, press 

 for 2s to select the menu setting mode. 

From RUN mode, press 

 for 4s to select pro mode.

To return to RUN mode, press 

 for 2s.

In RUN mode, you can lock the keys and adjust the threshold for the param-
eters set in menu setting mode while the sensor is operating. For details,
see page 5, section 10, MENU SETTING MODE.
Threshold settings are displayed in the sub-display.
If you attempt to set threshold values that exceed the pressure range
allowed, DP-100 will alert you. 

UP

 (exceeds the upper limit) or 

DOWN

 (exceeds

the lower limit) will appear on the sub-display. 

DOWN

 will also appear if the 

Hi

threshold value exceeds the 

Lo

 threshold value for the hysteresis mode or

window comparator mode.

Standard type

Notes:

• H (Hysteresis): 1 digit or more, 2 digits or more when psi is

selected as the pressure unit.

•

Hi-1

 or 

Lo-1

 is displayed for comparative output 1 and 

Hi-2

 or 

Lo-

2

 for comparative output 2 on the sub-display.

Notes:

• Hysteresis can be fixed in 8 levels.

For details, see page 6, section 11, PRO MODE.

•

Hi-1

 or 

Lo-1

 is displayed for comparative output 1 and 

Hi-2

 or 

Lo-

2

 for comparative output 2 on the sub-display.

8

SELECTING MODES

9

RUN MODE

Setting condition 1

Comparative output 1 set to:

EASY

 (EASY mode)

Comparative output 2 set to:

OFF

 (OFF)

0

Lo

Hi

ON

OFF

H (Hysteresis)

Pressure

Comparative 
output

0

H (Hysteresis)

H (Hysteresis)

Pressure

Lo

Hi

ON

OFF

Comparative 
output

MODE

MODE

MODE

MODE

Setting condition 2

Comparative output 1 set to:

EASY

 (EASY mode)

Comparative output 2 set to:

EASY

 (EASY mode)

Setting condition 3

Comparative output 1 set to:

EASY

 (EASY mode)

Comparative output 2 set to:

HYS

 (Hysteresis mode), or

WCMP

 (Window comparator mode)

Setting condition 4

Comparative output 1 set to:

HYS

 (Hysteresis mode), or

WCMP

 (Window comparator mode)

Comparative output 2 set to:

OFF

 (OFF)

Setting condition 5

Comparative output 1 set to:

HYS

 (Hysteresis mode), or

WCMP

 (Window comparator mode)

Comparative output 2 set to:

EASY

 (EASY mode)

Setting condition 6

Comparative output 1 set to:

HYS

 (Hysteresis mode), or

WCMP

 (Window comparator mode)

Comparative output 2 set to:

HYS

 (Hysteresis mode), or

WCMP

 (Window comparator mode)

MODE

Automatic

Automatic

MODE

MODE

MODE

Automatic

Automatic

Automatic

MODE

Automatic

Automatic

MODE

MODE

MODE

Automatic

Automatic

Automatic

MODE

MODE

MODE

MODE

Automatic

Automatic

Automatic

Automatic

Rugghölzli 2

CH - 5453 Busslingen

Tel. +41 (0)56 222 38 18

Fax +41 (0)56 222 10 12

[email protected]

www.sentronic.com

Produkte, Support und Service

SENTRONIC

AG

Summary of Contents for DP-100 series










Reviews:

No comments