Panasonic DMRE100HP, Service Manual

Page: 40 / 230

Item FL display Key operation
Mode name Description Remote controller key
Factors which
cause drive error The disc condition is
displayed when an
error occures. [4] [4] while in service mode
Disc manufacture ID Display the
manufacture’s ID for a
disc on which a drive
error has occured.
[4] [5] while in service mode
Illumination of all FL
/LEDs All FL and LEDs are lit
up. [5] [1] while in service mode
S1 signal output Forcibly superimpose
the S1 signal (5V DC)
on the EE chroma
signal, and check the
output on the S
terminal. [5] [2] while in service mode
S2 signal output Forcibly superimpose
the S2 signal (2.2V DC)
on the EE chroma
signal, and check the
output on the S
terminal. [5] [3] while in service mode
Front connection
inspection Press all the main
unit’s buttons and
check the connection
with the Main P.C.B.. [5] [4] while in service mode
Tray OPEN/CLOSE The RAM drive tray is
opened and closed
repeatedly. [9] [1] while in service mode
*Canceling the setting is to do
“forced power-off.”
Method:
Press the “POWER” button on
unit more than10 seconds.
40