56
RQT9439
Copying from a video equipment (video cassette recorder, etc.)
e.g., Connecting to the AV3 or DV input terminals on the front
≥
Turn off the unit and other video equipment before connecting.
§
Connect to terminals of the same colour.
If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.
When recording from the unit’s DV terminal
≥
Select the type of audio recording from “Audio Mode for DV Input”
in the Setup menu (
>
88).
≥
When recording from DV equipment (e.g., digital video
camcorder), you can record audio/video recordings from DV tape
only.
≥
When “Rec for High Speed Copy” (
>
86) is set to “On” and you
make a copy, the copy will be made using the picture size selected
in “Aspect for Recording” (
>
86) of the Setup menu.
16:9 image such as wide broadcasting (
>
31)
[Note]
≥
If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.
≥
While copying from DV input or executing the “Flexible Recording
via AV input” (
>
57)
– Copy will stop when timer recording starts.
– Chasing playback, simultaneous rec and play, switching of the
broadcast or input cannot be performed.
Recording disc:
[HDD]
Recording mode: XP, SP, LP, EP
Preparation
≥
Press [DRIVE SELECT] to select the HDD drive.
≥
When recording bilingual programmes, select “M1” or “M2” on the
external equipment.
≥
When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the Setup menu (
>
89).
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals, select
“AV3”.
2
Press [REC MODE] to select the
recording mode.
≥
DR, HG, HX, HE, HL and FR mode cannot be selected.
3
Start play on the other equipment.
4
When you want to start recording
Press [
¥
REC].
Recording starts.
To skip unwanted parts
Press [
;
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
∫
].
[Note]
When this unit is in EXT LINK standby (“EXT-L” is shown on the
unit’s display), this function does not work.
Audio/Video
cable
§
This unit
Other video equipment
Connect to Audio/Video output terminals.
DV cable
(IEEE 1394,
4-pin)
Manual recording
Almost all videos and DVD-Video on sale have been treated to
prevent illegal copying. Any software (firmware) that has been
so treated cannot be recorded using this unit.
DMRXS350EG-RQT9439-L_eng.book 56 ページ ２０１０年１月１４日 木曜日 午後４時２０分
