Convenient functions
SQT0989
69
[EX97S]
DVB Tuning
Favourites Edit
(
>
66
)
Channel List
(
>
67
)
Auto Setup
You can restart the Auto Setup. (
>
21)
1 Select the Auto Setup method, then press
[OK].
• Search by selected satellite
Transponders for the already found satellite
are searched for channels.
• Search all satellites
All satellites and transponders are searched
for channels.
2 Select “Yes”, then press [OK].
• The timer recording programmes are cancelled.
Manual Tuning
You can add new channels manually.
1 Select the items and change the items.
• Change the items by checking the signal
strength and signal quality displays.
2 Select “Start scan”, press [OK] to start scan.
• The set channel is displayed in the table.
• This function is not available during an Operator profile
update. (
>
24)
Update Channel List
You can update the channel list to the latest one.
1 Select the method and settings.
Search Mode
• Free Channels
• All Channels
Scan Mode
• Quick
Scans the suitable frequency for the
selected satellite.
• Full
Scans the whole frequency range.
2 Press [OK].
The unit starts searching for newly available
satellite digital channels.
• This function is not available during an Operator profile
update. (
>
24)
• If the channel you are looking for is not found, select “Full”
for “Scan Mode”. (
>
above)
Signal Condition
You can check the quality and strength of
signals.
• Press [
2
,
1
] to select the LNB.
• Press [CH
W X
] to select the channel.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
• When the signal is weak:
- adjust the position and direction of the dish.
- check that the current digital broadcast channel is
correctly broadcasting.
DMR-EX97EG_eng.book 69 ページ ２０１５年５月２７日 水曜日 午後５時３分
