Getting started
SQT0989
13
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
2
Open/close disc tray
3
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
4
CI module eject button (
>
14)
5
CI slot (
>
14)
6
Disc tray
7
USB port
Display
Pull to flip down the
front panel.
USB memory
Disc
Display
1 Drive (HDD or DVD) indicator
2 Disc indicator
3 Copying indicator
4 USB port indicator
5 Remote control signal indicator
6 Timer recording indicator
This indicator lights up when the timer
recording standby is activated.
7 Main display section indicator
• Messages and other information are
displayed. (
>
85)
8 Playback indicator
9 Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
PLAY
COPY
USB
HDD
DVD
1
2
5
6
4
3
7
8
9
DMR-EX97EG_eng.book 13 ページ ２０１５年５月２７日 水曜日 午後５時３分
