19
U80
ST Microprocessor
Communication Error on
Timer
Bus
Display appears when ST Microprocessor
Communication Error on Timer Bus occurs.
No display
U80 is displayed till the [POWER]
key is pressed.
U81
ST Microprocessor
Communication Error on
UART
Display appears when ST Microprocessor
Communication Error on DART occurs.
No display
U81 is displayed till the [POWER]
key is pressed.
U88
The unit is carrying out its
recovery process.
No display
U99
Hang-up
Displayed when communication error has
occurred between Main microprocessor and
Timer microprocessor.
No display
Displayed is left until the [POWER]
key is pressed.
H19 02
Inoperative fan motor
When inoperative fan motor is detected after
powered on, the power is turned off automati-
cally.
The event is saved in memory.
No display
No display
F00
No error information
Initial setting for error code in memory
(Error code Initialization is possible with error
code initialization and main unit initialization.)
No display
No display
F58
Drive hardware error
When drive unit error is detected, the event is
saved in memory.
No display
No display
F34
Initialization error when main
microprocessor is started up
for program recording
When initialization error is detected after start-
ing up main microprocessor for program
recording, the power is turned off automati-
cally.
The event is saved in memory.
No display
No display
F74
HDMI Device Key Communi-
cation error.
HDMI connection could not be authenticated
due to a transfer malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C doesn't operate
normally.
• When device key information recorded is
damaged.
No display
F75
HDMI Device Key Information
error
HDMI connection could not be authenticated
due to an internal data malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C doesn't operate
normally.
• When device key information recorded is
damaged.
No display
UNSUP-
PORT
Unsupported disc error
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
“This disc is
incompatible.”
Display for 5 seconds.
The character indication flows side-
ways.
NO READ Disc read error
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
“Cannot read.
Please check the
disc.”
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
Summary of Contents for DMR-EX93CEG
