Panasonic DMR-EX93CEG, Service Manual

Page: 25 / 103

25
HDD READ SEEK
Inspection Inspecting seek time of HDD to inspect per-
formance. At start
The [*] sign is added every 10 sec-
onds while inspecting.
Two digits on the right side are the
progress level of the inspection (The
unit is %).
Example on the way of inspection:
When HDD is OK after inspection:
(NG is displayed when error is exclud-
ing o)
(Transfer rate is calculated from the
AV scanning result, and when it is less
than 35Mbps, NG is displayed.)
$: [X] is displayed when seek time is
over 270msec., there is error or trans-
fer rate is NG.
Position at $ is space when excluding
those.
##: Number of data of over 100msec.
and less than 270msec.
When it is over 100, [99] is displayed.
When the number is less than 5, we
judge it normal.
Press [3] [1] in service mode.
* When canceling the inspection
mode while executing, do “forced
power-off”.
Method:
Press [POWER] key on the main
unit more than 4 seconds.
Item FL display Key operation
Mode name Description (Remote controller key)