![background image](http://html.mh-extra.com/html/rca/rp5032/rp5032_user-manual_334363001.webp)
Unpacking Your Player
You should have the following for
RP5032:
• one voice recorder
• two AAA batteries
• one USB cable
• one user manual
You should have the following for
RP5036:
• one voice recorder
• two AAA batteries
• one USB cable
• one clip-on microphone
• one carrying bag
• one user manual
Power supply
This unit can be operated by 2
“AAA” batteries.
Installing Batteries
(Included)
1. Slide the battery compartment
door to the bottom and lift up
the door to open.
2. Insert two “AAA” batteries
(included) with polarities
matching indications.
3. Replace the battery
compartment door.
Refer to the battery level
indicator on the upper right corner
of the display for battery level status.
Replace with new batteries when the
indicator is empty.
Auto power shut down
The unit will automatically turn off
if left idle for 3 minutes.
Using earphones and
external microphone
• When earphones are connected,
sound output from speaker will
be muted.
• When external microphone is
connected, no recording can be
made from built-in microphone.
Starting up the unit
Press and hold
PLAY
to turn on the
unit.
Shutting down the unit
While unit is in stop mode, press
STOP
to turn off the unit.
Key lock
This feature avoids accidental key
activation during recording or
playback.
1. Slide the
button upward ,
LOCKED will be flashing on the
display. (LOCK icon
will be
shown)
2. Slide the
button downward
to unlock the keys.
Tone
You can activate this feature so that
the beep sound can be heard
whenever you press on any button
except during playback and
recording.
1. Press
MENU
button repeatedly
until TONE shows on display.
2. Press
REVERSE
or
FORWARD
to
set beep sound ON/ OFF.
3. Press
MENU
to confirm selection.
Setting Recording Mode
You can select between two
recording modes - manual recording
and AVR (automatic voice recording).
1. Manual Recording
1. In
STOP
mode, select folder (A, B,
C or D). See "Select folder" for
more detail.
2. Press
RECORD
to start recording.
3. To pause recording, you can press
RECORD
once, press again to
resume recording.
4. To stop recording, press
STOP
.
2. AVR (Automatic Voice
Recording)
This feature allows the unit to sense
sound and to record only when you
are speaking into the microphone.
When dictation stops for about 3
seconds, recording will stop and then
start again automatically when you
resume dictation.
1. In stop mode, press
MENU
four
time. (See "Select folder" for
more detail.)
2. Press
REVERSE
or
FORWARD
to
toggle between AVR on and AVR
off.
3. Press
STOP
to exit to STOP mode.
4. Press
RECORD
to enter AVR
mode.
5. During AVR on
recording, press
VOL
UP
and
VOL DOWN
to select the
sensitivity of the
microphone among
LOW
,
MID
or
HIGH
.
(e.g. increase
sensitivity value
when recording
source is far from
the unit or the recording
environment is quiet).
6. Start dictation. Recording starts
automatically.
7. Press
STOP
to end AVR recording.
8. Repeat step 2 and select
AVR OFF
for de-selection.
Year/Date/12/24/Time
Setting
With this function, you can always
read on the display the recording
date and time of your recorded
messages. Follow the steps below for
time setting.
You can still use this unit for normal
recording without setting the time.
However, no correct recording date
and time can be referred for your
recorded messages.
1. Turn on the unit.
2. Press
MENU
repeatedly to enter
Time setting mode.
3. When “YEAR” is
displayed, the digits
of the year flashes
(default is 2006).
Press
REVERSE
or
FORWARD
to increase/decrease
the number, press
MENU
to
confirm.
4. Once the year is
entered , the digits
in the month field
will flash
(default is 1). Press
REVERSE
or
FORWARD
to increase/decrease
the number, press
MENU
to
confirm.
5. Once the month is entered, the
digits in the day will flash.
Press
REVERSE
or
FORWARD
to
increase/decrease the number,
press
MENU
to
confirm.
6. Once the date is
entered, you can
choose between
12/24 hour clock
display by pressing
REVERSE
/
FORWARD
, then press
MENU
to
confirm.
7. Once the time
format is entered,
the digits in the hour
field will flash
[default setting is 12
General Controls
The Display
(12 hour mode) & 0 (24 hour
mode)]. Press
REVERSE
or
FORWARD
to increase/decrease
the number, press
MENU
to
confirm.
8. Once the hour field is entered,
the digits in the minute field will
flash. Press
REVERSE
or
FORWARD
to increase/decrease
the number, press
MENU
to
confirm.
FCC Information
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may
cause undesired operation.
In accordance with FCC
requirements, changes or
modifications not expressly approved
by Thomson Inc. could void the user’s
authority to operate this product.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to
Part 15 of FCC Rules.These limits are
designed to provide reasonable
protection against harmful
interference in a residential
installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications.
However, there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
• Consult the dealer or an
experienced radio/TV technician
for help.
Also, the Federal Communications
Commission has prepared a helpful
booklet, "How To Identify and
Resolve Radio TV Interference
Problems." This booklet is available
from the U.S. Government Printing
Office, Washington, DC 20402. Please
specify stock number 004-000-00345-
4 when ordering copies.
For Your Records
In the event that service should be
required, you may need both the
model number. In the space below,
record the date and place of
purchase:
Date of Purchase:
Place of Purchase:
Service Information
This product should be serviced only
by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty
included in this Guide.
Ecology
Help protect the
environment - we
recommend that you
dispose of used batteries by
putting them into specially
designed receptacles.
Maintenance
Clean the unit with a soft
cloth, or a damp leather
chamois. Never use
solvents.
Precautions for the Unit
• Do not use the unit immediately
after transportation from a cold
place to a warm place;
condensation problem may result.
• Avoid shock to the unit especially
during recording. Recorded data
can be damaged.
• Do not store the unit near fire,
places with high temperature or
places with direct sunlight.
• Do not operate or store unit in
places with frequent static
electricity or electrical noise (e.g.
speaker, TV set).
• Clean the unit with a soft cloth or
a damp leather chamois. Never
use solvents.
• The unit must only be opened by
qualified personnel.
• Do not expose this appliance to
rain or moisture.
Precautions for Batteries
• If you do not use the unit for
more than one month, be sure to
remove the batteries to avoid
leakage.
• When installing batteries, be sure
that the polarities are correct.
Reversing polarity may cause
personal injury and damage to
the batteries.
• Never mix new batteries with old
ones. Do not mix battery types.
• Discard leaking batteries
immediately. Leaking batteries
can cause skin burns or other
personal injury.
• Do not dispose of in fire.
• Do not charge batteries which are
not intended to be recharged.
Power Supply
• (battery power) 2 x “AAA”
ESD Remark:
In case of misfunction due to
electrostatic discharge just reset the
product (disconnect and reconnect
of the power source may be
required) to resume normal
operation.
Select folder
You can select a specific folder (A, B,
C , D or
) for browsing. Default is
folder A.
1. Press
MENU
in stop
mode.
2. Folder A, B, C , D or
icon will flash
on display.
3. Press
REVERSE
or
FORWARD
to select
a folder.
4. Press
STOP
to exit
the Menu and enter the stop
mode in the desired folder.
Select file
You can select a specific file for
playback.
1. Select the folder you
need. (See "Select
folder" for more
detail)
2. Press
REVERSE
or
FORWARD
to
select the file you want. If the file
you want is in the current folder,
you can press
REVERSE
or
FORWARD
to select it directly in
stop and play mode.
Normal Playback
1. In Stop mode, select a folder (A,
B, C , D or
).
2. Select file by pressing
REVERSE
or
FORWARD
.
3. Press
PLAY
to start playback.
4. Press
PLAY
to pause playback,
press again to resume.
5. You can press
VOL UP
(+) or
VOL
DOWN
(-) to adjust listening
volume.
6. Press and hold
REVERSE
or
FORWARD
to do a quick search
within a file.
7. Press
REVERSE
or
FORWARD
once to skip one file forward or
backward.
8. Press
STOP
to stop playback.
Creating a bookmark
This feature allows you to create an
interception point in the recorded
message for quick reference.
1. During playback, press
REC
once
to set a bookmark, the bookmark
icon
flashes on the display.
2. You can create multiple
bookmarks until the memory is
full.
Skipping to a bookmark
You can skip to a bookmark anytime
during playback.
1. During playback, press
FORWARD
to go to the bookmark (if
available).
2. Press
FORWARD
or
BACKWARD
to select different bookmarks of
the file.
Deleting a bookmark
1. Select folder (A, B, C or D)
2. Select file.
3. Press
ERASE
once and
DELETE
will flash on the screen.
4. Press and hold
PLAY
for 3 seconds
to confirm deleting. (or press
STOP
to cancel erasing
bookmark)
Setting Recording Quality
You can select between three
recording qualities. Default is
HQ
.
Definition
•
SP
(Standard Play) -
Model RP5032 allows about 17.2
hours recording while model
RP5036 allows about 35.5 hours
recording
•
LP
(Long Play) -
Model RP5032 allows about 35
hours recording while model
RP5036 allows about 71.5 hours
recording
•
HQ
(High Quality) -
Model RP5032 allows about 8.5
hours recording while model
RP5036 allows 17.5 hours
recording
1. While in Stop mode, press
MENU
button until SP/LP/HQ flashes on
the display.
2. Toggle between
SP
,
HQ
, and
LP
by pressing
REVERSE
or
FORWARD
.
3. Confirm selection by pressing
MENU
or
STOP
button.
Setting Recording
Condition
You can select between two
recording conditions. Default is
DICT
.
Definition
•
CONF
(Conference) - in a more
open area and recording source is
far from the unit.
•
DICT
(Dictation) - in a more
enclosed area and recording
source is close to the unit.
1. Press
MENU
until DICT or CONF
flash on the display.
2. Select recording condition by
pressing
REVERSE
or
FORWARD
.
3. Confirm selection by pressing
MENU
button. (You may press
STOP
to exit from further
selection.)
FCC Information
FCC Information
General Controls
FCC Information
Display Messages
Before You Begin
Setting the Time
Before You Begin
Setting the Time
Basic Operation
Basic Operation
Bookmark
Recording Mode
Recording Quality / Condition
WARNING:
TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
T R I A N G L E I S A
WARNING SIGN
ALERTING YOU OF
I M P O R T A N T
I N S T R U C T I O N S
A C C O M PA N Y I N G
T H E P R O D U C T.
T H E L I G H T N I N G
FLASH AND ARROW-
HEAD WITHIN THE
T R I A N G L E I S A
W A R N I N G S I G N
ALERTING YOU OF
" D A N G E R O U S
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
D O N O T R E M O V E C O V E R
( O R B A C K ) . N O U S E R -
S E RV I C E A B L E PA R T S I N -
S I D E . R E F E R S E RV I C I N G
T O Q U A L I F I E D S E R V I C E
PERSONNEL.
RCA
RP5032
Equipment tested for
compliance as a
complete unit
RCA
RP5036
Equipment tested for
compliance as a
complete unit
ALL
APPEND
CUT-E
CUT-S
DELETE
FULL
MM/DD
12 HOUR
24 HOUR
TIME
INSERT
INTRO
OFF
ON
SEN MID
TONE
NO TONE
VOL 15
YEAR
LOCKED
FORMAT
SPEED
WAIT...
001%
PAUSE
Select all (Introductory Playback & Erasing All Files)
Appendix (Adding Appendix)
Cut End (Cutting)
Cut Start (Cutting)
Delete (Erasing Selected File)
Memory full
Month / day entry mode.
12 hour time display mode.
24 hour time display mode.
Time entry mode
Insertion (Inserting New Segments)
Introduction (Introductory Playback)
Off (Automatic Voice Recording)
On (Automatic Voice Recording)
Sensitivity Level (AVR)
Beeping sound on(Setting Beep Sound)
No beeping sound (Setting Beep Sound)
Volume (Setting Volume)
Year (Setting Year)
Key locked
Format the memory
Speed of playback
Unit is busy
Formatting is in process
Playback paused
MM
DD
AM
AM
Tip
:
Press
STOP
to exit to Menu mode.
Note:
• You can record up to 99 files in
one folder, not exceeding 396
files in total. When the
maximum limit is reached,
“FULL” will show on the display.
• You can find the files transferred
from the computer in the
folder. See "Connecting to the
Computer" for details of file
transfer.
• "ALL" is displayed if you are at
the first file and press
REVERSE
or last file and press
FORWARD
.
See IntroScan for more detail.
A
B
REMAIN
SP
ONE
DICT
AM
A
Note:
• When the memory is full,
“FULL” will show on the
display.
• If the file have multiple
bookmarks, steps 1-4 will
delete ALL bookmarks.
• If there are bookmarks in a
file, pressing
FORWARD
will
go through the bookmarks
first before skipping to the
next file.
• If there are bookmarks in a
file, pressing
BACKWARD
twice if you want to skip to
the previous file.
Tip:
To view the remaining time
and other recording
information, you may press
PLAY
during recording.
Tip:
The first syllable or two may
be lost when you start recording
because this ‘sound’ is used to
turn on the AVR feature. It is a
good practice to make some
‘sounds’ or say a short word to
activate the AVR before you
begin actual dictation.
AVR
AVR
Tip:
For conferences, to obtain
optimum recording quality, place
the recorder with the microphone
freely exposed to the sound source
as close as convenient. A built-in
automatic recording level control
will set the optimum record level
during manual recording. Avoid
recording near unwanted noise
sources, such as air conditioners or
fans.
RP5032
RP5036
It is important to read this instruction book prior to using your new product for the first time.
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.
User manual
Guide de l’utilisateur
Thomson Inc.
P.O. Box 1976, Indianapolis, IN 46206-1976
©2007 Thomson Inc.
Trademark(s) © Registered
Marca(s) © Registrada(s)
Marque(s) © Deposée(s)
www.rcaaudiovideo.com
Printed in China/Impreso en China
5642961C (EN/F)
Comercializadora Thomson de México, S.A. de C.V.
Álvaro Obregón No. 151. Piso 13.
Col. Roma. Delegación Cuauhtémoc
C.P. 06700. México, D.F.
Telefono: 52-55-11-020360
RFC: CTM-980723-KS5
Recording
indicator
Built-in
microphone
REMAIN
SP HQ
ONE
ALL
FAST
SLOW
DICT
CONF
AVR
MM
DD
AM
PM
B
C
D
A
LP
BEEP
ERASE:
Erases file
MENU:
Folder, record
condition, record
quality, AVR on/off,
speed, play condition,
beep tone, set
year/day/12/24/time
REC:
starts /
pauses
recording.
STOP:
stops
playback/
recording. Turns
off the unit.
PLAY:
turns the
unit on. Starts/
pauses playback.
FORWARD:
skips and
searches forward.
Selects/Browses
under menu mode.
REVERSE:
skips and
searches backward.
Selects/Browses
under menu mode.
VOL UP:
Volume up
VOL DOWN:
Volume
down
: keylock
on/off
External
microphone
jack
USB jack
Playback
mode:
Play one/
Play all
Folder
(A/B/C/D/ )
File selected
Total number of
files in a folder
Bookmark
Play
Total
remaining
time for
recording
Battery level
indicator
Key Lock
AM/PM
Keytone
Recording
Conditions
Automatic
Voice
Recording
Recording
Qualities
Connects
headphones
Time/date/
recorded time
Advanced Operation
Advanced Operation
Connecting to the Computer
Connecting to the Computer
Troubleshooting Tips
U.S. Limited Warranty
U.S. Limited Warranty
Canadian limited warranty
Note
Append
You can add an appendix (e.g.
reminder, supplementary
information) to the end
of the file.
1. Select folder.
2. Select file for adding
an appendix.
3. Press
PLAY
to start
playback.
4. During playback, press
MENU
until “APPEND”flashing on the
display.
5. Press
RECORD
within 3 seconds
to start recording appendix.
6. Press
STOP
to stop recording.
Cut
You can erase unwanted parts from
your recording.
1. Select folder.
2. Select file.
3. Start playback of the file with the
unwanted part.
4. Press
ERASE
to
mark the start of
the unwanted part,
“CUT-S” flashes on
the display.
5. Press
ERASE
to
mark the end of the
unwanted part,
“CUT-E” flashes on
the display.
6. Press
ERASE
again to confirm
cutting (or press
STOP
to cancel)
7. “WAIT” will show on the display.
8. After the memory rearrangement
is completed, the unit will go to
STOP
mode.
Format (Caution! All data
inside the memory will be
erased)
You can format the internal memory
when needed. (e.g. compatibility
problem, etc.)
The procedures are as follows:
1. Turn on the unit.
2. Press
ERASE
, “DELETE” will flash
on the display.
3. Press and hold
REC
for 3 seconds,
“FORMAT” will flash on the
display.
4. Press and hold
ERASE
, the
completed percentage will show
on the display, formatting is in
process.
5. After the formatting is
completed, the remain time of
the selected memory will show
on the display.
Install the USB Driver
(Windows 98SE Only)
For Windows 98SE system, you need
to install a USB driver before your
computer can recognize your player.
1. Go to the following link:
http://www.rcaaudiovideo.com/en
-US/DownloadSelection.html
and select your product category
by clicking"Digital Voice
Recorder" from the drop down
menu.
2. Select your model number RP5032
or RP5036 from the drop down
menu by clicking on it.
3. Click "Go" to load the download
page and download the driver for
your model.
4. Open the downloaded file and
follow the on-screen instruction.
5. After installation is completed,
reboot your computer.
Plugged into the computer
You can transfer files with your
computer via USB connection.
1. Use the USB cable supplied to
connect the unit to the computer.
2. “PC-LINK” will show on the
display.
3. The unit will appear as a
removable drive in your
computer.
Disconnecting from the
computer
Unplug the USB cable after you have
copied files to or from the unit.
Unit doesn’t turn on
• Check that batteries are properly
inserted and not exhausted.
• Make sure battery compartment
door is properly closed.
• Make sure LOCK function is not
activated.
Display keeps flashing when unit
is off
• You may not have set the time.
Refer to section on Time Setting.
Cannot record
• Make sure LOCK function is not
activated.
• Make sure memory is not full.
• You have recorded 99 files in one
folder. Try recording in a new
folder.
Cannot show recording date and
time during playback
• You may have not set the date
and time before recording. Refer
to section ‘Time Setting’.
No sound from speaker during
playback
• Make sure volume is not set to 0.
• Headphones should not be
connected.
Cannot edit
• Make sure LOCK function is not
activated.
Cannot activate the unit after
pressing on keys
• There may be software problems.
Remove the batteries to reset the
unit.
Recordable time becomes shorter
• You may have set the recording
quality to ‘High Quality’, refer to
section ‘Setting Recording
Quality’.
Cannot perform playback
• Make sure you have selected
folder with recorded messages.
• Make sure LOCK function is not
activated.
Cannot erase recorded file(s)
• Make sure you follow each step
under section “Erasing Selected
File” carefully.
Cannot stop recording when AVR
ON
• If the
HIGH
AVR sensitivity is
selected, recording may not be
stop in noisy environment.
Cannot keep the saved setting
• If the batteries are removed,
saved settings may be removed.
Using your unit as a file
storage device
The unit can function as a
detachable data storage. You can
take along your favorite images and
documents wherever you go. Simple
cut-and-paste or drag-and-drop files
to or from it via USB connection, the
unit will appear as a removable disk
in Windows Explorer.
Transfer Files via Windows
Explorer (Drag and Drop)
Your player is associated with a drive
letter. From Windows Explorer,
highlight all the mp3 files/folders
you want to transfer to your Player
and drag them to the folder named
“MUSIC” in the drive. Your mp3 files
can be found in this folder in the
Player once it is disconnected from
the computer.
What your warranty covers:
•
Defects in materials or workmanship.
For how long after your purchase:
• One year from date of purchase.
The warranty period for rental units begins with the first rental or 45 days from
date of shipment to the rental firm, whichever comes first.
What we will do:
• Provide you with a new, or at our option, a refurbished unit. The exchange unit
is under warranty for the remainder of the original product’s warranty period.
• Proof of purchase in the form of a bill of sale or receipted invoice which is
evidence that the product is within the warranty period must be presented to
obtain warranty service. For rental firms, proof of first rental is also required.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc., which were originally provided
with the product. We recommend using the original carton and packing
materials.
• Include evidence of purchase date such as the bill of sale. Also print your name
and address and a description of the defect. Send via standard UPS or its
equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for of loss or damage. Thomson accepts no liability in case
of damage or loss en route to Thomson.
• Pay any charges billed to you by the Exchange Center for service not covered by
the warranty.
• A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding
operating Instructions and user controls. For additional information, ask your
dealer.)
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO
THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR
EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE
SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. THOMSON INC. SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF
WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF
THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
•
Some states do not allow the exclusion nor limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the above limitations or exclusions may not apply to you.
•
This warranty gives you specific legal rights, and you also may have other rights
that vary from state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
Thomson multimedia Ltd. warrants to the purchaser or gift recipient that if any
manufacturing defect becomes apparent in this product within 1 year from the
original date of purchase, it will be replaced free of charge, including return
transportation.
This warranty does not include damage to the product resulting from accidents,
misuse or leaking batteries.
Should your product not perform properly during the warranty period, either:
1. Return it to the selling dealer with proof of purchase for replacement,
OR
2. Remove the batteries (where applicable), and pack product complete with
accessories in the original carton (or equivalent). Mail prepaid (with proof of
purchase) and insured to:
Thomson multimedia Ltd.
6200 Edwards Blvd.,
Mississauga, Ontario L5T 2V7
Canada
The provisions of this written warranty are in addition to and not a modification of
or subtraction from the statutory warranties and other rights and remedies
contained in any applicable legislation, and to the extent that any such provisions
purport to disclaim, exclude or limit any such statutory warranties and other rights
and remedies, such provisions shall be deemed to be amended to the extent
necessary to comply therewith.
If you are unable to find a qualified servicer for out of warranty service, you may
write to:
Thomson Inc.
P.O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-0944
Attach your sales receipt to this booklet for future reference. This information is
required if service is needed during the warranty period.
PURCHASE DATE
NAME OF STORE
Tip:
Cutting, inserting new
segments and adding appendix
will only update the recorded
time length, without changing
recording time and date.
SP
ONE
AM
A
SP
ONE
AM
A
SP
DICT
A
SP
DICT
A
SP
DICT
A
SP
DICT
A
REMAIN
SP
DICT
A
Tip:
• Data transfer is possible even
if no batteries are installed in
the unit.
• On some operating system, a
message warning about
"Removing a USB device
without stopping it…" might
appear, you can press OK to
safely ignore it.
SP
ONE
AM
A
IntroScan
This feature allows playback of the
beginning 3 seconds of each file in a
folder.
1. Select folder (A, B, C
, D or
) and file.
2. Press
REVERSE
or
FORWARD
until ALL
shows on display
3. Press
PLAY
to start
introductory
playback, INTRO
shows on display.
4. Press
PLAY
to start
playing
desired file.
5. Press
STOP
to exit Intro Scan
sooner.
Play one / play all
You can choose to play a specific file
or all files in a folder.
1. In STOP mode, press
MENU
button repeatedly until ONE
appears on display.
2. Press
REVERSE
or
FORWARD
to
toggle between ONE and ALL.
Erasing selected file
You can delete a file by the
following steps:
1. Select folder (A, B, C , D or
)
2. Select file.
3. Press
ERASE
once and
DELETE
will flash on the screen.
4. Press and hold
ERASE
for 3
seconds to confirm deleting. (or
press
STOP
to cancel erasing file)
Erasing all files in a folder
You can delete all files in a specific
folder by the following steps:
1. Turn on the unit.
2. Select a folder (A, B, C , D or
).
3. In Stop mode, press
FORWARD
continuously until “
ALL
” appears
on the display.
4. Press
ERASE
and “
DELETE
” will
flash on the display.
5. Press and hold ERASE for about 3
seconds, all files in the selected
folder will be erased completely
(or press STOP to cancel erasing
all files).
CAUTION
• The edit function does not
operate when battery power is
too low or the Introduction Mode
is in use.
• After editing a message, “WAIT”
will be displayed. Do not power
off the device until “WAIT”
disappears.
Speed
You can adjust the playback speed.
1. Select folder.
2. Select file for
adjusting playback
speed.
3. Press
PLAY
to start
playback.
4. During playback,
press
MENU
once,
"SPEED" will appear
on the display..
5. Press
REVERSE
or
FORWARD
to toggle between
FAST and SLOW.
6. Press
PLAY
to confirm and exit.
Insert
You can insert new segments into a
file without erasing previously
recorded content.
1. Select folder.
2. Select file for inserting new
segment.
3. Start playback.
4. Press
MENU
twice to
start recording new
segment, “INSERT”
will flash on the
display. Press
RECORD
within
three seconds.
5. Press
STOP
to stop recording.
6. “WAIT” will show on the display.
7. After the memory rearrangement
is completed, the unit will go to
STOP mode.
Other Functions
Erasing File / Folder
Advanced Operation
SP
DICT
AM
A
MM
DD
SP
A
MM
DD
Tip:
File numbers that come after
erased file will move down one
number automatically.
FAST
SLOW
SP
ONE
AM
A
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la class B est
conforme à la norme du NMB-003 du Canada
2
1
3
Record
Note:
When the unit is off
and the lock button is active,
"LOCKED" will flash on the display
whenever you press on any button.
BEEP
BEEP
RP5032/36 EN_F (ver C) 2/4/07 2:07 PM Page 1