Panasonic DMR-ES35VEG, Service Manual

Page: 27 / 105

Item FL display Key operation
Mode name Description (Remote controller key)
AV2(V)/AV1(Y/C) I/O
Setting Set input to AV2 (V) and set output to AV1
(Y/C) for I/O checking Press [8] [2] in service mode.
AV2(RGB)/AV1(V) I/O
Setting Set input to AV2 (RGB) and set output to
AV1 (V) for I/O checking Press [8] [3] in service mode.
P50(H) Output Timer Microprocessor IC7504-76 output
High signal for AV1-pin 10 passing through
inverter (approx. 0V DC at AV1-pin 10). When OK.
When NG.
Press [8] [4] in service mode.
P50(L) Output Timer Microprocessor IC7504-76 output Low
signal for AV1-pin 10 passing through
inverter (approx. 4.4V DC at AV1-pin 10). When OK.
When NG.
Press [8] [5] in service mode.
Tray OPEN/CLOSE Test The RAM drive tray is opened and closed
repeatedly.
“*” is number of open/close cycle
times.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button of Remote
Controller more than 10 seconds.
Error code initialization Initialization of the last error code held by
timer (Write in F00) Press [9] [8] in service mode.
Initialize Service Last Drive Error, Error history and Error
Codes stored on the unit are initialized to
factory setting. Press [9] [9] in service mode.
Finishing service mode Release Service Mode. Display in STOP (E-E) mode. Press power button on the front
panel or Remote controller in
service mode.
27
DMR-ES35VEG / DMR-ES35VEC