Panasonic DMR-ES35VEG, Service Manual

Page: 20 / 105

Error Code Diagnosis contents Description Monitor Display Automatic FL display
NO READ Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read. “Cannot read.
Please check the
disc.”
HARD
ERR Drive error The drive detected a hard error. “ DVD drive error.” Display for 5 seconds.
SELF
CHECK Restoration operation Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, there is the possibility that
defective Digital P.C.B. / RAM drive. No display
PLEASE
WAIT Unit is in termination process Unit is in termination process now.
“BYE” is displayed and power will be turned
off.
In case “Quick Start” of setup menu is ON, it
is displayed in restoration operation for AC
off.
No display
UN-
FORMAT Unformatted disc error You have inserted an unformatted DVD-
RAM or DVD-RW that is unformatted or
recorded on other equipment. Format:
This disc is not
formatted properly.
Format the disc in
DISK
MANAGEMENT?
IR ERR IR communication error [IR ERR] is display when communication
between Timer microprocessor and IR
microprocessor fails. No display
No REC Recording is impossible [No REC] is displayed when recording is
impossible due to the defect, dirt or wound
of media. No display
20
DMR-ES35VEG / DMR-ES35VEC