Panasonic DMR-ES15EE, Manual

Page: 31 / 149

Item FL display Key operation
Mode name Description (Remote controller
Delete the Error
History Delete Error History information
stored on the unit. Press [9] [7] in service
mode.
AV4(V)/AV1(RGB) I
/O Setting Set input to AV4 (V) and set
output to AV1 (RGB) for I/O
checking Press [8] [0] in service
mode.
AV2(Y/C)/AV1(V) I/
O Setting Set input to AV2 (Y/C) and set
output to AV1 (V) for I/O checking Press [8] [1] in service
mode.
AV2(V)/AV1(Y/C) I/
O Setting Set input to AV2 (V) and set
output to AV1 (Y/C) for I/O
checking Press [8] [2] in service
mode.
AV2(RGB)/AV1(V) I
/O Setting Set input to AV2 (RGB) and set
output to AV1 (V) for I/O checking Press [8] [3] in service
mode.
P50(H) Output Timer Microprocessor IC7501-76
output High signal for AV1-pin 10
passing through inverter
(approx. 0V DC at AV1-pin 10). When OK.
When NG.
Press [8] [4] in service
mode.
P50(L) Output Timer Microprocessor IC7501-76
output Low signal for AV1-pin 10
passing through inverter
(approx. 4.4V DC at AV1-pin 10). When OK.
When NG.
Press [8] [5] in service
mode.
Tray OPEN/
CLOSE Test The RAM drive tray is opened
and closed repeatedly.
“*” is number of open/
close cycle times.
Press [9] [1] in service
mode
*When releasing
mode, press the
button of Remote
Controller more
seconds.
Error code
initialization Initialization of the last error
code held by timer (Write in F00) Press [9] [8] in service
mode.
Initialize Service Last Drive Error, Error history
and Error Codes stored on the
unit are initialized to factory
setting. Press [9] [9] in service
mode.
31