22
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Display following the then mode.
When the power is ON, press
[STOP], [POWER] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and
reexecute operation shown above.
(*All the main unit’s parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and
reexecute this command.
*When releasing Aging mode, press
[POWER] key.
Demonstration
lock/unlock
Ejection of the disc is prohibited.
The lock setting is effective until unlocking the
tray and not released by “Main unit
initialization” of service mode.
*When lock the tray.
“LOCK” is displayed for 3 seconds.
When the power is on, press
[STOP] and [POWER] keys
simultaneously for 5 seconds in the
condition that a disc in the tray.
NOTE:
Time difference between pressing
[STOP] and [POWER] should be
within 0.5 sec.
*When unlock the tray.
“UNLOCK” is displayed for 3 sec-
onds.
When the power is on, press
[STOP] and [POWER] keys
simultaneously for 5 seconds while
the tray being locked.
NOTE:
Time difference between pressing
[STOP] and [POWER] should be
within 0.5 sec.
*When press OPEN/CLOSE key
while the tray being locked.
Display “LOCK” for 3 seconds.
Press [OPEN/CLOSE] key while the
tray being locked.
Item
FL Display
Key Operation
Mode Name
Description
Front Key
Summary of Contents for DMR-EH59GA
