- When soldering or unsoldering, please completely remove all of
the solder on the pins or solder area, and be sure to heat the
soldering points with the Pb free solder until it melts enough.
5. Each Button
6. New Feature
6.1. Quick start function(REC)
1. General
A few seconds after tuning on the unit,you can start recording
to DVD-RAM,HDD.
You can switch the operation of this function (ON/OFF) on the
menu screen. .
2. Quick start(REC) principle
In the power-off at Quick start, only power supplies for video
IC,tuner and storage media are cut off.
When the REC button is pushed a few second after the
power button is pushed, Audio and Video data are stored in
DDR SDRAM before a storage media(DVD-RAM or HDD)
preparation.
*Preparation time DVD-RAM: Fabout 8seconds
HDD: about 18seconds
After a storage media(DVD-RAM or HDD)
preparation,Audio and Video data are transfer from DDR SDRAM
to the storage media.
8
Summary of Contents for DMR-EH50EB
