Panasonic DMR-EH50EB, Service Manual

Page: 21 / 136

Item FL display Key operation
Mode name Description (Remote controller
RTSC Return in
XP
(A & V)
AV1 input signal is encoded (XP),
decoded (XP) and output
decoded signal to external
without DISC recording and DISC
playback. Initial mode: EE2/ Interlace
/ XP/ Audio 48kHz Press [1] [3] in service
mode.
Switch Interlace/
Progressive Press [1] [4] in RTSC
Return XP mode.
*I/P are switched
alternately.
Audio 44.1 kHz/ 48 kHz
Switch Press [2] [4] in RTSC
Return XP mode.
*48 kHz / 44.1 kHz
switched alternately.
I/P Switch Switch Interlace and Progressive
in EE mode.
*Initial setting is “Interlace”.
*This command is effective
during executing “White Picture
Output”, “Magenta Picture
Output” and “RTSC Return in XP
(A & V)” modes.
Initial mode is Interlace
Switch Interlace/
Progressive
Press [1] [4] in I/
mode.
*I/P are switched
alternately.
Audio Mute
(XTMUTE) Check whether mute is applied
normally by the timer
microprocessor. Press [2] [1] in service
mode.
Audio Mute
(XDMUTE) Check whether mute is applied
normally by the Digital P.C.B.. Press [2] [2] in service
mode.
Audio Pattern
Output The audio pattern stored in the
internal memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching
operation of DAC can be
confirmed by sub command [2]
[4].
Initial mode (Audio 48kHz) Press [2] [3] in service
mode.
Audio 44.1kHz/48kHz
switching Press [2] [4] in Audio
Pattern Output mode.
*48 kHz / 44.1 kHz
switched alternately.
21