Panasonic DMR-EH50EB, Service Manual

Page: 15 / 136

Error
Code
Diagnosis contents Description Monitor
Display
Automatic FL
F00 No error information Initial setting for error code in
memory
(Error code Initialization is
possible with error code
initialization and main unit
initialization.)
No display No display
F58 Drive hardware error When drive unit error is detected,
the event is saved in memory. No display No display
F34 Initialization error
when main
microprocessor is
started up for program
recording When initialization error is
detected after starting up main
microprocessor for program
recording, the power is turned
off automatically.
The event is saved in memory.
No display No display
UNSUPPORT
Unsupported disc
error *An unsupported format disc
was played, although the drive
starts normally.
*The data format is not
supported, although the media
type is supported.
*Exceptionally in case of the disc
is dirty.
“This disc is
incompatible.”
Display for 5 seconds.
NO
READ Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not
be read.
“Cannot read.
Please check
the disc.”
Display for 5 seconds.
HARD
ERR Drive error The drive detected a hard error. “DVD drive
error.”
Display for 5 seconds.
SELF
CHECK Restoration operation Since the power cord fell out
during a power failure or
operation, it is under restoration
operation.
*It will OK, if a display
disappears automatically. If a
display does not disappear, there
is the possibility that defective
Digital P.C.B. / RAM drive.
No display
Full
Program 32 programs are
already set. 32 programs are already set. No display
15