Co
nveni
e
nt
f
unct
ions
VQT3C14
88
Changing the unit’s settings
¾
Home Network ( DLNA ) Server Settings
You can set the DLNA (Server) function (
>
74)
¾
Home Network ( DLNA ) Server
function
You can switch between enable/disable of the DLNA
(Server) function.
≥
If “On” is selected, “Power Save in Standby” is
fixed to “Off”. (
>
89)
¾
Setting device name
It is also possible to change the name of this unit on
the network.
≥
Select from a preset list
Select the preset name, then press [OK].
≥
Create name
Enter the name. (
>
70, Entering text)
¾
Registration type for remote devices
¾
Remote device list
≥
This function cannot be enabled when “Manual” is
selected in “Registration type for remote devices”.
(
>
left)
≥
To register equipment manually
1 Select the device name or the MAC Address for
the device you want to register, then press
[OK].
2 Select “Yes”, then press [OK].
≥
To deregister equipment
1 Select the registered equipment, then press
[OK].
2 Select “Yes”, then press [OK].
Automatic
All connected devices on the same
network can access this unit.
Manual
Only registered devices can
access this unit.
Network Settings
Home Network ( DLNA ) Server Settings
Home Network ( DLNA ) Server Settings
Home Network ( DLNA ) Server function
Setting device name
Registration type for remote devices
Remote device list
≥
The maximum number of equipment that can be registered is
16.
DMRBWT800&700GL_eng.book 88 ページ ２０１１年２月１４日 月曜日 午後３時５０分
