Downloaded from www.vandenborre.be
8
VQT2U34
STEP 1 : Connecting to a TV
≥
Do not place the unit on amplifiers/receiver or equipment
that may become hot. The heat can damage the unit.
≥
Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥
Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥
Refer to page 37, about recommended settings for each
piece of connected equipment.
≥
Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
\For\the\United\Kingdom\and\Republic\of\Ireland\only\
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 BEFORE CONNECTION.
∫
Via an HDMI AV OUT terminal
– It is possible to playback 3D videos by connecting
this unit with a 3D compatible TV.
≥
Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
(
>
30).
≥
The HDMI connection supports VIERA Link “HDAVI
Control” (
>
25).
Highest Quality
(VIDEO)
HDMI IN
HDMI cable
(8)
DMP-BDT100EG-VQT2U34.book 8 ページ ２０１０年６月２２日 火曜日 午前１１時０分
