3
TQBS0469
Precautions
Unit
To reduce the risk of fire, electric shock or product damage,
≥
Do not expose this unit to rain, moisture, dripping or splashing.
≥
Do not place objects filled with liquids, such as vases, on this unit.
≥
Use the recommended accessories.
≥
Do not remove covers.
≥
Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
AC adaptor
≥
The power plug is the disconnecting device. Install this unit so that
the power plug can be unplugged from the socket outlet
immediately.
Small object
≥
Keep the batteries out of reach of children to prevent swallowing.
Unit
≥
This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may
result in hazardous radiation exposure.
≥
Do not place sources of naked flames, such as lighted candles, on
this unit.
≥
Some portions of this unit may become hot during use.When
moving or cleaning this unit, disconnect the AC adaptor and wait
for 3 minutes or longer.
Placement
To reduce the risk of fire, electric shock or product damage,
≥
Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
≥
Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥
Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Batteries
Mishandling of batteries can cause electrolyte leakage and may
cause a fire.
≥
Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥
When disposing of the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
≥
Do not mix old and new batteries or different types at the same
time.
≥
Do not heat or expose to flame.
≥
Do not leave the battery(ies) in a car exposed to direct sunlight for
a long period of time with doors and windows closed.
≥
Do not take apart or short circuit.
≥
Do not recharge alkaline or manganese batteries.
≥
Do not use batteries if the covering has been peeled off.
Remove batteries if you do not intend to use the remote control for a
long period of time. Store in a cool, dark place.
Avoid the use in the following conditions
≥
High or low extreme temperatures during use, storage or
transportation.
≥
Replacement of a battery with an incorrect type.
≥
Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery,that can result in an explosion.
≥
Extremely high temperature and/or extremely low air pressure that
can result in an explosion or the leakage of flammable liquid or
gas.
AC adaptor
This AC adaptor operates on AC between 110 V and 240 V.
But
≥
In the U.S.A. and Canada, the AC adaptor must be connected to a
120 V AC power supply only.
≥
When connecting to an AC supply outside of the U.S.A. or
Canada, use a plug adaptor to suit the AC outlet configuration.
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete the
user settings.
1
Turn the unit on.
2
Press and hold [
] on the main unit and the [0] on the remote
control at the same time for more than 5 seconds.
– POWER LED starts to flash, and “00 RET” is displayed on
the screen.
3
Press [
1
] (right) repeatedly on the remote control until “08 FIN”
is displayed on the screen.
4
Press and hold [OK] for more than 5 seconds.
≥
The operation history may be recorded in the memory of this unit.
(Inside of product)
WARNING
CAUTION
To dispose or transfer this
unit
DMP-BD90_Basic-TQBS0469.book 3 ページ ２０２３年１月５日 木曜日 午前１１時３２分
