Panasonic DMP-BD60GN Operating Instructions Manual Download Page 41

41

RQT9407

Network

Page

Other difficulties with playback

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close 
together.

I can’t connect to the network.

Has the LAN cable come unplugged? Check that the LAN cable is properly connected.

Have you plugged in a modular cable for use with a telephone into the LAN terminal on this 

unit? Connect with a straight LAN cable.

Is the power for the modem or broadband router turned on? Turn the power on for each 

device.

Is there a mistake in the network settings? Follow any instructions you may have received 

from your ISP (Internet Service Provider) and make changes to the settings.

Are the broadband router settings correct? Read the operating instructions for the broadband 

router.

Is the broadband router and/or modem correctly connected? Check the operating 

instructions for each device and connect accordingly.

Check the “Network Settings” and “BD-Live Internet Access” settings.

13

13

29, 32

While using my PC, I cannot 

connect to the network.

Does your Internet Service Provider (ISP) or service contract prevent multiple terminals 

connecting at the same time? Check the content of your contract.

VIERA CAST does not operate 
or connect.

Is the network connection correct?

Image of the video contents may be disturbed or may not display depending on how busy the 

environment or the connected line is.

13

Audio and video momentarily 
pause.

This occurs between playlist chapters or scenes (

[AVCHD]

).

When playing a title recorded on both layers, the unit automatically switches between layers 

and plays the title in the same way as a normal program. However, video and audio may 

momentarily cut out when the unit is switching layers.

BD-Video or DVD-Video is not 
played.

Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is 

not defective.

You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.

Some BD-Video can only be output with HDMI.

Cover

29

Picture-in-picture is not played 
with BD-Video.

Confirm whether the disc supports picture-in-picture.

The BD-Live is not played with 
BD-Video.

Confirm whether the disc supports the BD-Live.

The inserted SD card does not have sufficient available capacity.

The SD card is write-protected.

Sub contents copied to an SD card are provided by the disc producer as a part of the 

BD-Video content. Even if you record images and audio onto an SD card, it cannot be played 

as a BD-Live.

19

7

19

Alternative soundtrack and 
subtitles cannot be selected.

The languages are not recorded on the disc.

You may not be able to use the on-screen menu to change the soundtrack and subtitles on 

some discs. Use the disc’s menus to make changes.

16

No subtitles.

Subtitles are not recorded on the disc.

Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.

26

Angle cannot be changed.

Angles can only be changed during scenes where different angles are recorded.

The resume play function does 
not work.

Memorized positions are canceled when

– pressing [

] several times.

– opening the disc tray.

The resume play function may not work depending on the disc.

[BD-V]

: On BD-Video discs including BD-J, the resume play function does not work.

1

Press [SETUP].

2

Press [

3

,

4

] to select “General” and press [OK].

3

Press [

3

,

4

] to select “Remote Control” and 

press [OK].

4

Press [

3

,

4

] to select the code (1, 2, or 3) and 

press [OK].

5

To change the code on the remote control

While pressing [OK], press and hold the 

numbered button ([1], [2] or [3]) for more than 

5 seconds.

6

Press [OK].

When the following indicator 
appears on the unit’s display and 
you are unable to operate the unit

The unit’s remote control code
Press and hold [OK] and the 
indicated number button at the same 
time for more than 5 seconds.

Set Code 1

Set Code 2
Set Code 3

Remote Control

Press 

[

] and [OK ]together

for more than 5 seconds on 

the remote.

NOTE

Re

fe

re

n

ce

RQT9407~Body_mst.fm  41 ページ  2009年2月23日 月曜日 午後8時9分

Summary of Contents for DMP-BD60GN













































Reviews: