13
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
Display in P-off mode.
Press [POWER] key over than 10
seconds.
Aging
Perform sequence of modes as * Aging
Description shown below continually.
Display following the then mode.
When the power is ON, press
[STOP], [POWER] and [OPEN/
CLOSE] simultaneously for over 5
seconds and less than 10 seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit’s parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-exe-
cute this command.
*When releasing Aging mode, press
[POWER] key over 10 seconds.
Item
FL display
Key operation
Mode name
Description
Front Key
Summary of Contents for DMP-BD30EE
