Panasonic DMCFX5PP - DIGITAL STILL CAMERA Operating Instructions Manual Download

Page: 19 / 132

Preparation

Removing the Card

Preparation

• Check that the camera is turned off and that the lens is retracted.

Open the card/battery door.

Push the card until it clicks, then
pull the card out upright.

Close the card/battery door.

Suggestions/Tips

• The card may be damaged if it is

removed while the camera is on.

• If the card/battery door cannot be

completely closed, remove the card
and insert it again.

• If the card cannot be fully inserted,

check the direction of the card.

• We recommend using Panasonic’s SD

Memory Card. (Use only the genuine
card.)

• The card may be damaged if it is not

fully inserted.

FX5_FX1-PP.book 19 ページ２００３年１２月１５日　月曜日　午後１時２７分

Summary of Contents for DMCFX5PP - DIGITAL STILL CAMERA





































































































































Search results

Summary of Contents for DMCFX5PP - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFX5PP - DIGITAL STILL CAMERA

Brands by name

Popular brands

Panasonic DMCFX5PP - DIGITAL STILL CAMERA, Operating Instructions Manual

Search results

Summary of Contents for DMCFX5PP - DIGITAL STILL CAMERA

Reviews:

Related manuals for DMCFX5PP - DIGITAL STILL CAMERA

Brands by name

Popular brands