38
2. Insert the 2nd Lens Frame Unit as the drawing below
indicated.
* Align the portion without an external wall of the 2nd
Lens Frame Unit with the OIS Drive Lever portion of the
Straight Frame, then put the each Cam Pin of the 2nd
Lens Frame in the each Groove of the Both Side Cam
Frame Unit and the Straight Frame.
9.5.2.
Insert the 1st Lens Frame Unit
1. Turn the Straight Frame using Slotted Driver, etc., then
turn it in the direction of arrow fully.
(Turn the Straight Frame to the "Tele" position.)
2. Insert the 1st Lens Frame Unit as the drawing below
indicated.
(1) Position the printing portion (LEICA) of the 1st Lens
Frame Unit and the OIS Drive Lever portion of the
Both Side Cam Frame Unit as shown below.
(deviated approx. 60 degrees)
(2) Insert the each Cam Pin of the 1st Lens Frame Unit in
the each Groove of the Both Side Cam Frame Unit
and the Straight Frame.
* Check if the 2nd Lens Frame Unit moves smoothly
when the 1st Lens Frame Unit is rotated.
Summary of Contents for DMC-TZ80EB
