Application (Record)
Using the [Rec] menu
SQW0206
- 151 -
Press to select [Start Shooting] and press [MENU/SET]
Press the shutter button fully
•The recording starts automatically.
•If the recording interval is set to 40 seconds or more, this camera will turn off
automatically while in recording standby. The [Time Lapse Shot] recording will
continue even if the camera is turned off, and the camera is automatically turned
on at the recording start time. If you want to turn on the camera manually, press
the camera [ON/OFF] button or press and hold the Playback button.
•To stop the [Time Lapse Shot] recording partway through, press [MENU/SET]
or the Playback button while the power is turned on, and end the recording as
instructed in the displayed confirmation screen.
●
This function is not intended for application-specific systems (monitoring cameras).
●
When the recording interval is set to a value of less than 1 minute (to take pictures of
nightscapes, etc.) and the previous recording has not finished yet, the later recording
may be skipped.
●
When [Alert] is set to [ON], a warning sound will be emitted. Check this setting to see
whether it is suitable for the recording environment.
●
The camera is fixed to the zoom position set prior to the start of recording.
●
[Time Lapse Shot] cannot be used in the following cases:
•Scene Modes ([High Speed Video], [3D Photo Mode])
●
When the number of recorded pictures is one, it will not be saved as a group picture.
●
[Time Lapse Shot] will be cancelled partway through in the following cases:
•When the battery is low
•When the number of recordable pictures is used up
•When the Playback button is pressed
•When the recording mode is changed
●
Do not connect the AV cable (optional) or USB connection cable (supplied) during
[Time Lapse Shot] recording.
●
When using zoom, the camera could tilt when the lens barrel extends. Be sure to
secure the camera in place on a tripod or by other means.
