30
9.3.9.
Removal of the Battery Door Unit
(Fig. D14)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The Screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
9.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the MOS FPC unit when disassembling or
reassembling the lens in order to maintain it clean.
When remove it, refer to item “9.7.”.
2. Keep dust or dirt away from the lens.
To remove dirt or dust from the lens, blow with dry air.
3. Do not touch the lens surface.
4. Use lens cleaning KIT (VFK1900BK).
5. Apply grease (RFKZ0472) as shown on “THE APPLICA-
TION OF GREASE METHOD” in the figure.
9.4.1.
Removal of the Zoom Motor Unit
and Lens FPC Unit
