87
VQT1C63
Connecting to other equipment
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a
printer supporting PictBridge via the USB
connection cable (supplied), you can select
the pictures to be printed or start printing
on the LCD monitor. Make the necessary
settings on your printer beforehand. (Read
your printer’s operating instructions.)
1 Turn on the camera and the printer.
2 Set the mode dial to [
].
• [PLEASE CONNECT TO THE PRINTER]
appears.
3 Connect the camera to a printer
via the USB connection cable
A
(supplied).
• Connect the USB connection cable with
the [
c
] mark facing the [
q
] mark on
the [DIGITAL] socket.
• Hold
C
and then insert or pull the USB
connection cable straight.
• Do not use any other USB connection
cables except the supplied one.
• When you connect the camera to a
printer without setting the mode dial to
[
], remove the cable, set the mode
dial to [
], turn the camera and the
printer off and on, and connect again.
• If a card is not inserted when the camera is
connected to the printer, you can print the
picture data on the built-in memory. If a card
is inserted, you can print the picture data on it.
• You cannot switch between the built-in
memory and the card while the camera is
connected to the printer. When you want to
switch between the built-in memory and the
card, disconnect the USB connection cable,
insert (or remove) the card and then connect
the USB connection cable to the printer again.
• To print the age in [BABY1]/[BABY2]
and [PET] in scene mode (P47) or the
departure date for [TRAVEL DATE] (P55),
use the software [LUMIX Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the CD-
ROM (supplied) and print from the PC. For
information about this, refer to the separate
operating instructions for PC connection.
• To fi nd out more about PictBridge compliant
printers, contact your local dealer.
■
To connect
A
: USB connection cable (supplied)
B
: AC adaptor (DMW-AC6; optional)
• It may take time to print some pictures. Use
batteries with suffi cient battery power (P24)
or the AC adaptor (DMW-AC6; optional)
when you connect to a printer.
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC6; optional).
C
: Check the facing of the connector and
push straight in.
A
B
DIGITAL
V.OUT
DC IN
3V
C