Panasonic DMC-G2R Operating Instructions Manual Download

Page: 71 / 212

VQT2S42

Advanced (Recording pictures)

∫

Shutter speed for each flash setting

1 This becomes 60 seconds in Shutter-Priority AE mode

2 This becomes 60 seconds in Shutter-Priority AE mode and B (Bulb) in the Manual Exposure Mode.

3 This becomes B (Bulb) in the Manual Exposure Mode.

• When the flash is activated, the shutter speed cannot be set to faster than 1/160th of a second.

• In Intelligent Auto Mode, shutter speed changes depending on the identified scene.

Note

• Do not bring the flash too close to objects or close the flash while it is activated. The

objects may be discoloured by its heat or lighting.

• Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/

Red-Eye Reduction etc. It causes a malfunction.

• When you take a picture beyond the available flash range, the exposure may not be adjusted

properly and the picture may become bright or dark.

• When the flash is being charged, the flash icon blinks red, and you cannot take a picture even

when you press the shutter button fully.

• The white balance may not be properly adjusted if the flash level is insufficient for the subject.

• When you use certain lenses, light from the flash may be blocked or fail to cover the lens

field of view, causing dark areas to appear in the resulting pictures.

• When taking a picture with the flash, we recommend removing the lens hood. In some

cases it may not allow the scene to be illuminated properly.

• It may take time to charge the flash if you repeat taking a picture. Take a picture after the

access indication disappears.

• The Red-Eye Reduction effect differs between people. Also, if the subject was far away from

the camera or was not looking at the first flash, the effect may not be evident.

• When you attach an external flash, it takes priority over the built-in flash. Refer to P179 for the

external flash.

Applicable modes:

Adjust the flash output when the subject is small, or the reflectivity is very high or low.

Select [FLASH ADJUST.] in the [REC] mode menu. (P33)

Press

to set the flash output and then press

[MENU/SET].

• You can adjust from [

2 EV] to [

2 EV] in steps of [1/3 EV].

• Select [0 EV] to return to the original flash output.

Press [MENU/SET] to close the menu.

• You can also press the shutter button halfway to close the menu.

Note

• [

] or [

] is displayed on the flash icon in the screen when the flash level is adjusted.

• The flash output setting is memorised even if the camera is turned off.

Flash setting

Shutter speed (Sec.)

Flash setting

Shutter speed (Sec.)

‡

1/60

to 1/4000th

1 to 1/4000th

‰

1/60

to 1/160th

to 1/4000th

Adjust the flash output

DMC-G2K&G2W&G2EB-VQT2S42_eng.book 71 ページ２０１０年４月１３日　火曜日　午後７時４０分

Summary of Contents for DMC-G2R





















































































































































































































Search results

Summary of Contents for DMC-G2R

Reviews:

Related manuals for DMC-G2R

Brands by name

Popular brands

Panasonic DMC-G2R, Operating Instructions Manual

Search results

Summary of Contents for DMC-G2R

Reviews:

Related manuals for DMC-G2R

Brands by name

Popular brands